AXLE184B rev.2 ww.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 1(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXLE184B rev.: 2 date: 2014-04-06 oscillator type: smd (vc)tcxo in gull wing package parameter min. typ. max. unit condition frequency range 6 6 1 190 190 800 mhz mhz mhz clipped sine wave sine wave hcmos, pecl, lvds frequency stability ppm vs. operating temperature range 0.5 to 5 see tables 1 & 2 ppm option 4 & 5 vs. supply voltage variation 0.1 0.3 ppm v s 5 % vs. load change 0.2 ppm load 10 % long term (aging) per year 1 ppm @+40c frequency adjustment range mechanical (internal trimmer) 3 ppm option 1 = b lank electronic frequency control (efc) 5 ppm option 1 = v efc voltage v c 0.15 0.5 1.65 2.5 3.15 4.5 v v option 2 = 3 option 2 = 5 efc slope ( ? f / ? v c ) positive efc input impedance 100 k? rf output signal waveform clipped sine wave sine wave hcmos pecl lvds option 3 = c option 3 = s option 3 = h option 3 = p option 3 = l load 10 k? || 10 pf 50 ? 15 pf 50 ? + bias option 3 = c option 3 = s option 3 = h option 3 = p or l 0.8 1.0 v p-p v p-p option 3 = c / 3.3 v option 3 = c / 5.0 v 0 +10 dbm dbm option 3 = s / 3.3 v option 3 = s / 5.0 v amplitude according to relevant logic standard option 3 = h , p, l supply voltage v s 3.15 4.75 3.3 5.0 3.45 5.25 v v option 2 = 3 option 2 = 5 current consumption (note 2) 2 ~ 30 12 ~ 30 15 ~ 50 25 ~ 100 ma ma ma ma option 3 = c option 3 = s option 3 = h option 3 = p or l enclosure (see drawing) (lxwxh) 18.6x12.0x7.3 max. mm pin compatible to co 02 weight 5 g packing tape & reel iec 60286-3 notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. depending on frequency and supply voltage 3. all combinations of options might not be available. please consult factory
AXLE184B rev.2 ww.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 2(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd control voltage v c -0.5 6 v v c to gnd storage temperature -55 +105 c frequency stability vs. temperature stability lower temperature upper temperature option 4 [ppm] option 5 t [c] option 5 t [c] 05 0.5 0 0 a +50 10 1.0 1 -10 b +60 15 1.5 2 -20 c +70 20 2.0 3 -30 d +75 25 2.5 4 -40 e +80 30 3.0 f +85 35 3.5 50 5.0 table 1 table 2 ordering code model option 1 [efc] * option 2 [supply voltage] option 3 [rf output] option 4 [stability] option 5 [temperature range] revision frequency [mhz] AXLE184B _ or v 3 or 5 c, s, h, p, l table 1 table 2 rev.2 10.000 example: AXLE184B-v-5-s-10-3d_rev.2 C 10.000 mhz handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs compliant yes no
AXLE184B rev.2 ww.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 3(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections (without efc) pin # symbol function 1 n.c. or comp out no connection or complementary rf output (pecl and lvds) 2 gnd ground 3 rf out rf output 4 v s supply voltage pin connections (with efc) pin # symbol function 1 v c control voltage (efc) 2 gnd ground 3 rf out rf output 4 v s supply voltage environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice.
AXLE184B rev.2 ww.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 4(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg revision history rev. drawing date [dd.mm.yyyy] remarks author checked 2 d1 01.10.2012 editorial changes bn bn 2 d2 06.04.2014 environmental conditions updated, e ditorial changes hh hh
|
